SLIP AGENT
All types of polymers are huge molecules with high molecular
weight with high melt viscosity. In fact, plastics form in melt
under high pressure and by going by nozzles, channels, pipes and
moulds in the shortest possible time.
To gain highest level of production rate with lest energy consumption, it is necessary to decrease the melt viscosity as far as possible. Adding slip agents and lubricants can affectively decrease interior and exterior friction.
Slip agent is a correctional additive which acts as an interior lubricant and during or after process will migrate to the surface and causes sensible decrease in friction. In the other word, it coats the surface by an unseen thin layer of this agent to decrease the friction actor and as an affect to provide required slippery property in the surface.
Characteristics:
§ Slip agents as an applicable range of Masterbatch designed to expose high anti-friction properties.
§ 50-2000 is a masterbatch that improve plastic processing by improving lubricant and slip characteristics and decreasing the cohesion of melt to machinery parts.
§ Besides its own tasks, this additive can be used to accelerate melt process, as an anti-block agent, …, too.
Advantages:
Decreasing interior and exterior friction within process
Improving lubricant and slip characteristics in barrel
Increasing production level
Adding this agent can solve problems you face when applying powder
form agents such as low plastic compatibility, weak dispersion, and
dust.
Suitable for thin and sensitive application because of excellent
dispersion
Applications:
Slip agent additive is designed to be used in LLDPE – LDPE – PE –HDPE – PP – PVC & … 50-2000 slip agent is especially applicable for nylon. Adding this additive to nylon can make it more delicate and easily separatable.
--> These information are just informative and subject no responsibilities for IRCO.
UV STABILIZER
Ultra violet
radiation from sun or other illuminant sources can cause bad effects
on plastic raw materials or final products.
UV radiation breaks chemical bonds in plastics. This happens in a process which is called photo-degradation and makes some effects such breaking apart, cracking, color changes and missing physical properties as impact power, elasticity…
Light stabilizers add to plastic resins to improve resistance of polymeric parts against light. This kind of additives prevents further undesired effects of natural or synthetic lights on plastic parts such as color change and gradual decrease in physical properties or effects on appearance of plastics.
Characteristics:
§ This light stabilizer as an applicable range of Masterbatch designed to expose high anti-UV properties and prevent bad effect on all plastic parts caused by sun light.
§ It will increase the life time of final product, extremely.
§ By applying this additive you can gain best light stability property with most suitable expense.
Advantages:
Adding this agent can solve problems you face when applying powder
form agents such low plastic compatibility, weak dispersion, and
dust.
Preventing downfall of physical property in final products and rise
the resistance in the exterior environment condition
Increasing properties especially in recycled plastics
Applications:
UV stabilizer additive is designed to be used in LLDPE – LDPE – PE –HDPE – PP – PVC & … this product is especially applicable & suitable for light sensitive polymers.
--> These information are just informative and subject no responsibilities for IRCO.
ANTI-STATIC
All polymers, because of their organic chemical properties are electricity isolators. But the necessity for this property is to have ability for absorbing and keeping static electricity which will quickly be unloaded in contacts by other surface with lower electricity level.
Anti-Static agent, in fact, is a media that provide the electrical conductivity by applying moisture absorber agents, so it will prevent loading of static electricity on the plastic surface.
This product will prevent focus and loading of static electricity on any plastic parts. By applying it, you can gain an anti-static product with the best quality.
Anti-static granule is a masterbatch that solved problems for working with powder form additives (such low compatibility with other additives, low stability, beauty decreases and dust), so effectively.
Characteristics:
§ This anti-static additive has a permanent effect.
§ It will make no effects on the color.
§ These additives have been designed in a way to expose highly reliable anti static properties.
Advantages:
Adding this agent can solve problems you face when applying powder
form agents such low plastic compatibility, weak dispersion, and
dust.
Excellent dispersion of agent throughout the mold
Preventing melt down in extrusion because of higher melt point
Higher level production, especially for sheets and film, by
preventing cohesion made by antistatic electricity
Preventing surface contamination of final products
Preventing the existence of static load crossing on a carpet with
synthetic fiber or plastic made floor covers
Diversity in loading materials
Applications:
Slip agent
additive is designed to be used in LLDPE – LDPE – PE –HDPE – PP –
PVC & … UV stabilizer is especially applicable for plastic made
parts, sheets and films.
--> These information are just informative and subject no responsibilities for IRCO.
PE WAX
Characteristics:
§ Excellent for applying in polyolefin
§ Lubricating effect for plasticized polymers
§ Additive to plasticizer-free PVC, its mixed polymers and polymer blends.
§ Compatible with synthetic plastic & rubber parts
Advantages:
Processing aid for colorant additives for plastics
In mixture with paraffin for the surface treatment cellophane
Can be used as an additive for DOP
Carrying dispersing properties
Acting as a softener
Applications:
► Additive to mixed polymers made of ethylene, propylene, butylenes, etc
► Additive to plastic toys
► Lubricant in PVC and its mixed polymers for the drinking
► Additive for fillers for utensils made of plastics
► In mixture with paraffin for the surface treatment of synthetic sausage skins made of cellophane
--> These information are just informative an
d subject no responsibilities for IRCO.
FLAME RETARDANT
Almost all of
plastic because of being organic are flammable. Attempts for
developing heat resistant plastics are increasing by daily increase
of plastic consumption. Now te
chnology
can offer us some kind of additives with flame retardant properties
and that really helps to vast plastic applications and safety.
Please, note not to misunderstand the flame retardants by anti fire or heat resistance additive.
Characteristics:
§ This additive has no effects on the color of final product.
§ It will decrease the risk of fast fire expansion causes by firing plastic parts.
Advantages:
Flame retardant masterbatch designed to expose some heavy duty and
good flame retardant properties.
Presenting flame retardant properties
Preventing
physical properties decrease in protected plastics
Preventing
oxidation properties in protected plastics
Applications:
Flame retardant additive is designed to be used in LLDPE – LDPE – PE –HDPE – PP – PVC & … It is especially applicable for plastic made parts and sheets.
--> These information are just informative and subject no responsibilities for IRCO.
PROCESSING AID
In the extrusion of LLDPE film processing problems like melt fracture, sharkskin, die buildup, reduced output, and poor optical properties are often noticed. With the addition of processing aid masterbatch these processing problems can be reduced or eliminated.
This additive is a concentrate of processing aids in pellet form. It contains fluoroelastromers in a PE carrier
Characteristics:
§ Processing aid masterbatch has been designed in a way to be applied in industry very easily.
§ Volatile content: <0.3%
§ The performance of this additive may be affected by HALS – and Nickel salts- based UV stabilizers and by amine based antistats.
§ This product should be stored in a cool and dry place, away from direct sunlight.
Advantages:
Elimination or
reduction of melt-fracture.
Reduced die build-up
Easier
use of LLPDE-rich blend
Improved
optical properties and surface gloss
Increased
extrusion output
Reduced
extrusion pressure
Reduced
energy cost
No
impact on printing and heat sealing
Applications:
► Film extrusion of LLDPE and blend of LLPDE/HDPE and LLPDE/LDPE
► HDPE blow molding
► General extrusion of polyolefin
--> These information are just informative and subject no responsibilities for IRCO.
ENGINEERED POLYMERS
Engineered polymers or calcium carbonate masterbatches are a kind whit different percentage of Calcium Carbonate based on polyolefin carrier resins. These are fillers for polyolefin resins.
Characteristics:
§ By applying this additive you can decrease production costs, presenting better heating quality and stability, improving printing properties with other diverse application for your process.
§ These polymers designed for polyolefin resin and should be used with
§ Because of granule form of this additive can be easily applied.
Advantages:
Better printing properties
More production rate
More
stability
Decrease
in expense over white pigments
Decrease
in need for heat, so saving energy and costs
Applications:
These polymers designed for polyolefin resin and should be used with. Because of granule form of this additive can be easily applied.
We are also capable to produce your desired compound with your required materials and formula.
--> These information are just informative and subject no responsibilities for IRCO.
Copyright © 2003 Takdesigner.All rights reserved.